Necessary Guidelines To Consider During Plumbing Emergencies in Nassau

Well, friends! You cannot always avoid an accident; but you can take efficient steps to lower the chances of an accident. However, the same principle will also work on plumbing also! For instance, you can minimize the chances of experiencing a sewage backup by avoiding anything flushing on to it. Another common mistakes that can lead to severe plumbing issues is ignoring minor leaks in the plumbing system of your home.

 

Essential Guidelines To Avoid Plumbing Emergencies

Whenever a plumbing emergency occurs, it’s very essential to keep your cool until our plumbing repair professionals will arrive. However, you should take a few steps to alleviate the plumbing problems instead of waiting the plumbers to arrive at your destination. If you will wait for the plumbers, then no doubt it will convert a small emergency to a major catastrophe.

In fact, if you will experience any major leak in the plumbing system, then it will be best for you to recognize the main water shut off valve of your home. By shutting down the main water supply of your home, you can stop the leak instantly. Again, if there is a minor leak in a pipe or fixture, then it can be avoided temporarily by using a duct tape.

Whenever you will encounter the first sign of any plumbing issue in your home, it will be a great idea to contact the plumbing repair experts in Nassau of Allied/All-City Inc. With having the team of experienced plumbers and years of excellence, we will be able to diagnose and repair your specific plumbing issues efficiently. If you will let our plumbing repair professionals to fix your necessary plumbing issues, then be sure that your plumbing emergency will be dealt in a swift and efficient way.

On the other hand, our plumbers in Nassau know that proper functioning of a residential plumbing system is imperative; when it comes to maintaining a neat and clean, safe and comfortable home. Therefore, we strive to offer preventive plumbing maintenance in order to let your household operation run smoothly.

So, if you have any plumbing related concerns in Nassau, then hurry up and contact the specialists plumbing repairs of Allied/All-City Inc at 516-785-2700.

Continue Reading...........

Consider Grease Traps Installation and Enable a Healthy Atmosphere In Your Restaurant

If you own a restaurant, then you might have heard that don’t pour oil, fat and grease down your drains. Well, it’s a true fact. The FOG (Fat, Oil and Grease) will clog the drain so that it will result an increase in the water pressure in the drain system. However, there is no way to stop all the grease particles from going down the kitchen drain. Therefore, you should consider a grease trap installation in your commercial kitchen.

 

What is a Grease Trap

Grease traps are otherwise known as ‘Grease Interceptors’ which are specific, essential units attached to the plumbing system under the kitchen sink or a localized area where several sinks connect to. As a restaurant owner, you should use much larger grease traps in restaurants in order to take care of the huge amount of grease; which will consequently go down the waste water drains and will clog septic tanks and sewer systems. For residential kitchens that do a lot of cooking, you can use smaller unit of grease traps so that the wastewater from the kitchen will flow through leaving the grease behind before reaching the septic tank. These tanks are responsible for the separation of fat, oil and grease from the water.

How Does a Grease Trap Work

The main job of grease traps is to filter/separate out the FOG or any solid from the wastewater before it  moves on to the septic tank. The traps do the work in the following way:

When the wastewater heads/goes down the drain, it drops into the grease trap where the water, grease, and small solids are deposited into the trap. As a result solid particles will sink to the bottom and the FOG will cool and float on the top, leaving the wastewater to stay in the middle. The outgoing line (discharge drain line) from the grease trap, has a special pipe coming mid-way into the tank from above that only allows waste water from the middle, without the grease and such to leave the tank and move on to your septic tank. The solid wastes and FOG will be trapped in the tank.

Varieties of Grease Traps

There are three main types of grease traps that you will find on the market recently.

Automatic Grease Removal Unit

Being known as AGRU, this trap is much more effective and expensive option. The skimmers of AGRU will help to remove the FOG efficiently; which makes this trap somewhat more complex than the other designs.

Gravity Operated Traps

As per the name, this trap uses the power of gravity to move the wastewater through its 2 to 3 tanks in order to capture the solid and FOG particles.

Hydromechanical

This is a type of grease trap; which proactively cools the wastewater in order to push the solids and FOG to the end point of the tank where they can be cleaned out.

Conclusion

At the end, grease traps are an essential addition to any commercial kitchen; so consider grease trap installation from Allied/All City Inc. No matter what your preferences are, whether it’s a fresh installation or a repair, our plumbers in Plainview will fix the plumbing related issues efficiently. For immediate plumbing assistance, feel free to reach us today at (516) 785 2700 or make a visit to our website today.


For more details or stay with connected with us like:- facebook, twitter, pinterest and maps.google .